|
Electrical Devices & Components |
 |
 |
 |
|
 | Cam Track« Conduit Benders - $ 17899.00
One bender to bend EMT, IMC and Rigid Conduit. Fast and easy set-up on the jobsite. True one shot 90° bends with CT models for quick accurate bends.
|
 | Quietsource - 40kw Generator - $ 11916.00
The liquid-cooled Quietsource generator makes available enviromentally quiet operation while resisting corrosion. Unit will run on either natural gas or LP gas.
|
 | Ultra TuggerÖ Cable Puller - $ 8602.91
Pulls up to 8,000 (35.8 kN) lbs. Versi-Boom System allows you to make versatile and fast set-ups and pull 10 (3 mm) or 20 (6 mm) of extra cable easily. Uses standard 3" rigid steel conduit for boom.
|
<;p>  | Fluke DTX 1200 Cat 6 Cable Tester - $ 7046.00
The Fluke DTX Series Cable Analyzers were designed with your time in mind. They significantly reduce the time it takes to certify your network when compared with competitors analyzers. The Fluke DTX testers will test and certify your CAT 6 cable in 12 seconds. Most other testers take over 30 seconds to perform the same test. This translates to 85 extra certifications before lunch! Not only do these analyzers test for problems, they also suggest potential actions to correct the problem, saving even more troubleshooting time.The DTX 1200 has a maximum testing bandwidth of 350 MHz, allowing all tests to be done in just 12 seconds in full compliance with industry standards.The DTX 1800 has a maximum testing bandwidth of 900 MHz, which will allow you to test video distribution, Class F, CATV and 10 Gigabit Ethernet cables
|
 | Ideal LANTEK 6 Cable Certifier Basic Kit - $ 6770.00
Why use a certification tester? Certification testers are used to determine whether your network meets specific ISO or TIA standards (i.e. Cat 5e, Cat 6 or Cat 7). They are the only option for you in this case. Also if your network is wired with both copper and fiber, use a certification tester. Ideal Industries LANTEK series cable certifiers are being used worldwide to certify networks.
|
 | Fluke FO Test Adapter Singlemode - $ 5546.00
The DSP-4000 series testers can be adapted very easily for testing of high-speed fiber networks. Whether your need is for Multimode, Single mode, or Gigabit, Fluke Networks has the right equipment for you. - DSP-FTA420S allows you to test 850 nm and 1300 nm multimode wavelengths up to 5000 meters- DSP-FTA430S allows you to test 1300 nm and 1500 nm wavelengths up to 10K meters- DSP-FTA440S uses a VCSEL (Vertical Cavity Surface Emitting Laser) source at 850 nm and an FP Laser light source at 1310. It accurately measures loss and length up to 5000 meters to ensure Gigabit Ethernet compliance.
|
 | Access Cabinet With Glass Door 39U 36"D - Cooper B-Line - $ 4617.20
Access Cabinet System Utilizing unique tubular top and base frames combined with extruded aluminum center posts, the Access cabinets cornerless frame design offers unmatched accessibility and usable space. Tubular frame construction provides maximum cable access through the top and base of the cabinet.
|
 | Quietsource - 11kw Generator - $ 3928.00
The liquid-cooled Quietsource generator makes available enviromentally quiet operation while resisting corrosion. Unit will run on either natural gas or LP gas.
|
 | 0.50 in SPOOL TEFLON EBS - $ 3424.99
Teflon® (TF) expandable sleeving is ideal in applications where flame, chemical and very high temperature resistance are significant considerations. The high temperature properties of TF make it the ideal choice for aerospace, military, high-tech and plenum applications where thermal stability and low outgassing are critical. TF is braided from 0.16" flame resistant Teflon perfluoroalkoxy (PFA) polymer monofilament. Available in clear color
|
 | Battery-powered CCX tool, 120 V charger - $ 2525.00
* Nickel-metal hydride battery (Ni-MH) delivers up to 140 cycles per charge. * 360° rotating head adjusts to your work position. * Lightweight, plus ergonomic-angled handle for comfortable, low-stress use. * Cycles in seconds with two-speed hydraulic pump, maximizing productivity. * Automatic retraction when crimping and cutting cycles are complete. * Uses all optional CCX blades and adapters * Includes two batteries, a choice of either a 120V, 12V or 230V one-hour charger, and a high-impact molded carrying case. * U.S. Patent #6,206,663 and Patent Pending.Specifications# Crimping Force 12,000 lb. (53 kN)# Length 14-3/4" (375 mm)# Height 12-1/8" (308 mm)# Weight 10.5 lbs. (4.8 kg)# Battery 12 Volt, 2.2 Ah, Ni-MH# Battery Charge Time 1 hour
|
 | 1-1/4" PP Slit Harness Wrap - $ 2287.47
The Richco slit harness wrap is a great product for wire management in the fiber optic industry. Not only does is bundle and protect cables and cords, but it also limit the bend radius of fiber optic cables by its patented design.
|
 | Pop N Plug Power Data Center - Standard - $ 1839.08
The Pop N Plug Power Data Center allows you to save the hole cut-out from your wood table and install it as the top of the Power Data Center. This design allows you to continue to display the original wood grain and finish of your table when the Pop N Plug Power Data Center is closed.
|
|
